The CT Perfusion Phantom helps ensure that your CT scanner and perfusion software are providing you consistent results.
The CT Perfusion Phantom is designed to mimic the injection of a contrast bolus into a region of interest allowing you to generate precise time-attenuation curves (TAC), of differing velocities, to better monitor your CT Perfusion program, and patients. Once you benchmark perfusion rates and TACs for each system using the phantom, you will be better positioned to know if future measurements show a true change, or if follow-up results are within the precision error of the measurements. Use the dose port to optimize imaging and perfusion protocols and results at the lowest possible dose.
ACR CT Perfusion recommendations1
Technique parameters affecting the radiation dose (kVp, mA and beam collimation) should be optimized for each scanner type so that diagnostic quality images and maps are produced at minimum radiation dose.
FDA recommendations for CT Perfusion studies2
Review your radiation dosing protocols for all CT perfusion scans to ensure that the correct dose is planned for each study. Any change to the default protocol should be cleared through the facility’s quality assurance program and be approved for image quality and dose by the radiologist and physicist.
Implement quality control procedures to ensure that dosing protocols are followed every time, and that the planned amount of radiation is administered.
|Covers and housings:||PVC, Acrylic|
|Dosimetry Port:||Standard CT Pencil Cambers up to|
|Central Scan Disk:||12.7 mm (0.5in) diameter|
|High Equivalency (HE)|
|Brain Mimicking Material|
|Artery Rod:||16 discrete sections of blood and contrast simulating materials to mimic arterial flow rates following a contrast bolus injection|
|Vein Rod:||16 discrete sections of blood and contrast simulating materials to mimic venous flow rates following a contrast bolus injection|
|Tissue Rods (Qty 2):||HE Brain Mimicking Material of 16 discrete sections of brain tissue to mimic tissue uptake rates following a contrast bolus injection|
|Velocity settings (mm/second):||1.31, 1.50, 1.75, 2.10, 2.63 +/- 2%|
|Rod Travel Distance:||10.5 cm (4.1 in)|
|Dimensions( L/ W/H):||55.5 x 25.4 x 30.5 cm (22 x 10 x 12 in)|
|Power:||8 AA batteries (included)|
|Weight:||13.6 kg (29.9 lbs)|
Includes customized, water-tight hard case for easy transport & safe storage. Case includes built-in wedges for use as a phantom holder.